Magnetic Therapy 915G
Magno 915G is a Magnetotherapy device with two output channels that are capable of producing electromagnetic fields that are continuous and pulsed with a maximum of 1100G. To apply the electromagnetic field on the patient's body, it is possible to use solenoids with diameters of 30 and 70 cm, as well as the possibility of using a single-disc applicator to apply electromagnetic fields locally.
Four-section Table Traction
- 4-part traction bed for back and neck
- Can be used for mobilization and manual therapy
- The possibility of stretching the neck while sitting
- Leather cover with the appropriate thickness of the mattress and anti-sweat
- Easy to move and move the bed using the foot pedal and high-quality wheels
- The ability to easily adjust the breakers by means of ergonomic handles
- The possibility of placing the device in three directions next to the bed
Stimulator 710P plus
710P plus is one of the devices that has gained special popularity among the products of the new company and has been presented with changes since the beginning of the company's production every year. One of the important reasons for the success of 710P plus is the logical placement of the regulators and indicators next to each other, its lightness and portability, as well as the ease of use by the physiotherapist. The advantage of saving the last settings is also added to the above. The factory default settings are such that you can perform the desired treatment without any adjustments, just by selecting the flow type or program and then increasing the flow range.
Vacuum Therapy Unit
This device includes caps inside which electrodes are placed and connected to the patient's body. When the vacuum device is connected to an electrotherapy device through the interface cable, it causes the transmission of electrical stimulations through these electrodes to the patient's body.
In addition to beauty and ease of use, the Smart series ultrasound machine has all the facilities that a physiotherapist needs for quality treatment. The device is equipped with an insufficient contact detection system and stops the time to measure the adequate time to prevent incomplete treatment in the case of low output efficiency on the patient. In order to protect the patient, according to the medical standard, the device's output is cut off when the temperature is not allowed, and the output remains cut off until the temperature of the head surface returns to the allowed limit. The device is automatically calibrated with the probe to provide the required output. The device detects any defects in the probe, cable, and connector and informs the therapist about the type of defect. The possibility of testing the probe in this device facilitates the periodic visits required for any medical device, quickly and flawlessly. All device controls including the display and Beep sound are adjustable.
620F is one of the devices that has gained special popularity among the products of the NOVIN company and has been presented with changes since the beginning of the company's production every year. One of the important reasons for the success of 620F is the logical placement of the regulators and indicators next to each other, as well as the ease of use by the physiotherapist, with the advantage of saving the last settings added to the above. The factory default settings are such that you can perform the desired treatment without any adjustments, just by selecting the current type or program and then increasing the current range.
Shockwave 360G is a radial shockwave with a pneumatic ballistic system, which was designed and developed in the Grand product series of Novin Medical Engineering Company.
In recent years, the use of stimulators has been introduced not only in the field of rehabilitation and physiotherapy but also in the field of beauty and fitness and plays an effective role. In this method, due to the intensity of the flow that enters the muscles in each treatment session, a much higher amount of calories is consumed compared to normal exercises which lead to fat burning. In addition, muscle stimulation also plays an effective role in strengthening and recovering muscles. As a result, according to the mentioned cases, the use of stimulators can have an effective role in slimming, fitness, and improvement of sagging skin.
Tecar 560G is a tecarotherapy device manufactured by Novin company, which is designed and presented in the Grand series of products. The maximum output power of this device is 120 volt-amps and it has three sweep, pulse and continuous modes. The frequency of the RF current in continuous and intermittent modes can be adjusted to 350, 448, 680, 900 and 1100 kHz.
560G has 33 treatment programs, for each of which additional explanations, as well as images of the treatment area, are provided. The use of a 10-inch color touch screen, as well as the optimal design of the user interface, has provided ease of use and greater user satisfaction.
High Power Laser
The 885G high-power laser device is a high-power laser device with a maximum (real) output power of 15 watts, which can be adjusted from 100 milliwatts, and therefore, it also covers the low-power laser modality. 885G simultaneously emits two wavelengths of 810 and 980 nm at the output and provides the possibility of penetrating deep and superficial tissues at the same time. Laser radiation in this device is possible in various modes including continuous, pulsed, burst, and single. For ease of use and to increase the level of radiation, two spacers with diameters of 25 and 35 mm have been considered, by connecting them to the head of the handpiece, the level of radiation can be increased and, as a result, treatment time and energy density can be reduced.
Traction is a non-invasive treatment method in physiotherapy that reduces pain by stretching the spine of the vertebrae apart, reducing the pressure on the discs and nerve branches, thereby increasing blood circulation, reducing pain, stabilizing or correcting the position of the vertebrae in the spine.
Knee Continues Passive Motion
The continuous passive motion device, known by the abbreviation CPM, is a mechanical therapeutic modality that passively moves the operated joint continuously and for a relatively long time. Therefore, in addition to preventing the joint from drying out, it facilitates the tissue repair process and also speeds up the recovery of joint function and movement.
The CPM 545M device of Novin company is a CPM device of the lower limb that provides flexion and extension movements in the knee joint in a desired duration and frequency and range of motion. With the help of this device, it is possible to perform the main movements of the knee joint correctly and as desired even when the physiotherapist or nurse is not present, without threatening the person or causing damage to the body.